Although this lesson has not been explained in the class we compiled since the summary had already previously.

1.1.2.3.3.Digital kamera.


A digital fotokamera draws pictures and stores them in digital form. The individual images are usually on the pc, where they are processed, stored and printed.
Important selection criteria for digital camera:

-Resolution.
-Compression.
-Length.
-Zoom.
-Picture capacity.
-Lcd-monitor.
-Interface.

Digital camcorder:

When recording with dv-camcorder are two important things: One is the recording sensor supplied by the picture digital This means that a special chip in the camera, the colors and speed lim every single point in the video image into a pay values translated. Since the quantity of such data videofilmes with his 25 pictures per second, however, would be too high for them to the relatively small and slow in the current magnetband dv-kassette disk, you will not only pay for conversion into digital values But simultaneously a compression of images.
These cameras have:
-Resolution: The digital video images from a dv-kamera bestteht from 720 * 576bild points, for a total of 414,729 pixels.
-CCD-anzahl: Most of your camcorder for the amateur range ccd-sensor have a few models in the area have opposed semi over 3 ccds.

Webcam

A webcam is a video camera, which happens to komminikation used the internet.




1.1.2.4.Acoustic input


The processing of audio information is similar to that of image over informationen.Diese task usually the computers a sound card, but when the analog input to digital information is converted and in a rückum wandlung issue.
The processing of naturally spoken speak divided into two part resort:

-Spracher identification: It should be noted, was speaking wurde.bestimmte muster by comparison must recognize and be processed.

-Identification sprecherer this involves the investigation who spoke. The basis of the language sounded bildes we checked who the speakers.











1.1.3. From relea


1.1.3.1. Bildchirm


The bildchirm is one of the most commonly used ausga begeräte, the data are used for the eye temporarily visible on screen. In order for the monitor knows what he represented, he gets his signals from the graphics card in the pc as picture signals and synchronisations signals, which the vertical and horizontal control Aurich Tung

The main male merk schimkarte are the picture resolution, bit depth and performance of analog digital-wanslers

Today monitors use different techniques to display images from the characters; As cathode ray tubes, liquid crytall displays (lcd) us plasma screens.


Kathoden beam tube (ctr): it is the most common used anzeige.die crt is a vaku to glasröhre electrons with a gun on one side and a materials coated with phosphorescent screen on the other seite.wir electrons gun at the electrical voltage applied, creates a electrons flow, bundled into a beam.

Liquid crystal display (LCD):In enclosed glass surfaces substances get through a voltage other optical properties, it is between light transmittance and light changed, allowing the viewer a controlled pixel light or dark.
Control is generally through a matrix of electrodes, but it can also use laser beam heats the liquid crystals, and thereby increase the polarization behavior changed. LCD screens are very shallow water, have a low weight and low power consumption.
In LCD-Schirmen active, the individual pixels on thin-film individually activated. The result is a spicy, flicker-free image (even at low refresh rates). The color calibration for the printing technology is hardly possible.


Plasma screen: it consists of two glass plates between which ionized gas (plasma) is included. In one of the glass plates are thin, horizontal energie, in the other glass plate vertical.
Plasma monitors are flat and very easy (for example, is a 53 cm-Bildschirm only 6 cm thick and weighs just a few kilograms)
Plasma screens are still expensive, have a high power consumption, as compared with cathode ray monitors a low resolution and colour depth.











Die optische Qualität der Bildschirmanzeige wird durch folgende Faktoren bestimmt:

Bildchirmgrösse: The required size of the screen depends on the specific task. Graphical tasks require a larger screen than tasks, which with text or numbers worked.

Resolution: It is in the horizontal and vertical direction represented the total number of pixels.

Color Display: The display of colors, depending on the ranges used video and graphics cards from monochrome to con millions of colors.

Bildwiederholffrequenz: The image reconstruction wood frequency depends on the post-burn time of phosphorus.
The screen surface: The surface should be possible choices, screen devices are set up so that no barrier or light sources into their clippings. The contrast between characters and background should be freely adjustable and between 1:5 to 1:5.
The higher the resolution, color depth and refresh rate, the greater are the demands on the graphics card.


1.1.3.2.DIGITALPROJEKTOREN .

The development of LCD projectors similar to that of slide projectors, instead of a slide, a backlit LCD panel and with the help of a lens projected on the wall. This one makes you look at the effect of the birefringent optical effect of the liquid crystals when a voltage to use.
Established data projectors for the presentation of computer and video images, but also in the entertainment electronics find it more and more.
The quality of the projector is determined by the brightness of the resolution, as well as equipment such as interfaces, as Zusatzaeinrichtungen laser pointer, speaker.
Looking at the trends in the graphic output, it shows a tendency for one reduction in the form of so-called Microdesplays project.
On the other sides tries, three-dimensional objects on display screens.


1.1.3.3. PRINTERS


Printers are output devices that are visually represented data on print makers spend. By contrast, the production data visually legible. It distinguishes between attack printers and stop free printers. Stop pushers bring the color by mechanical shock to the paper. The impact printer without mechanichen attack, they are much quieter, but no blueprints.








Thermal printer
Wärmeempfindliches paper is a matrix of Heitzstäben to the respective agencies erwämt. The paper wärmmeemppfindliche reagiertr to mechanical pressure and is not filing for longer suitable.

InkjetPrinters

For small jets will be in a matrix, or by direct diversion of the jet ink on an absorbing paper axes. The advantage of inkjet printers is an almost silent operation with good quality printing in color. The print speed is between 2 and 20 pages per minute.

Laser Printers

The operation is similar to a photocopier, the print quality of laser printers is very good, the printing speed is very high.

Color Laser
The laser printing with full-color, as in the offset printing with four colors and requires four printing stations to raise the toner to the print medium.

1. Grundlagen der Informationsverarbeitung

The first part is busy with the representation of information in computer systems. Besides, these also become units for the amount in information like the Beispeil for the storage capacity aingeführt.

The second part Is about approach of computer systems. Among other things it is explained here which factors determine the speed of a computer system.

The third part presents finally the usual warehouse media and their typical qualities.

1.1 Benutzerschnittstelle

The user interface is for the user visible part of the interaction interface of a software product.This includes all units, forms and techniques through which the user with the computer system communicates.This user interface is to a certain extent dependent on the hardware and the operating software of the system and of course directly dependent on the use of application software.
Under user interface are all those parts of a computer system, taken together, the user can perceive.The user interface is primarily a function of available inputs and output devices, and in addition, the associated software;Under user interface is both hardware and software.The user interface defines largely determine how the user with a system that can work.The design must be governed by the respective addressees district judge, according to his requirements, his habits and his skills.
The user interface with many factors determine the shape of the interaction between the user and the computer system.The human-computer interaction is a mutual exchange of information between the user and the system, this is the nature of things is usually bound and formalized, at least in modern interktiven systems is the control in the Regal case the user

1.1.2 Input

Visual elements have a perceptible physical shape, in contrast to the acoustic and tactile elements in the time running, volatile processes.On the input side keyboards and pointing devices than traditional instruments available.Detection devices for Hand-Kopf-Augen-und body movements occur in the form of data gloves, helmets and Datenanzügen or camera configurations.For the audio input will be used microphones.

1.1.2.1.Keyboard

Keys are entering elements that allow a fixed alphabet characters enter.The signs must not required letters or numbers, but it can also include other symbols.
In the case of a standard PC keyboard today is a micro-processor that to the change in the river flow recognizes what button is pressed, for example, has been released.The microchip the keyboard transmits a code that identifies the button on the machine.The basic input / output system of the computer converts the code into the computer used by the character set and writes about it in an `S peicherpuffer from which the operating system can read the sign.

By the nature of the data to different man:Numeric keyboard, alphanumeric keyboard, function keyboard, layered keyboards.

With an ergonomic design of the work place should be independent of the keyboard and screen freely movable.The arrangement of the keys according to the standard typewriter, which is distributed internationally.The function acts are the work task and lift divided by color, shape and arrangement.

In selecting the keyboards following points should be observed:
a)The keyboard is very flat front, so that the ball can be laid out
b)Allow a fold-out stand ergonomic list
c)The individual keys are curved inwards, so that the security meeting will be heard
d)The keyboard may not reflect
e)The keys have a significant pressure point
f)The keyboard should not slip
g)And finally, the keyboard stable, heavy keyboards are therefore preferable.



-Laser keyboard.

A laser on a tabletop or other opaque flat surface a keyboard layout in a size of approximately 241 x 106 mm.Infrared sensors touch from the finger movements and set them in order Keystrokes.The Erkennungsprinzio based on the fact that the infrared layer interrupted, the resulting UV-Reflektion generated by the sensor detected in 3 dimensions and coordinates assigned.

1.1.2.2. Showing instruments

The function of the finger and Positioniergeräten is finding through to including the selection of visual information or pictured visualized objects on the user interface of Elle, and possibly their Positonierung.It can be one or several selected objects to be manipulated.
At devices will show the movements of the device into electrical signals, as a coordinate pair weiterverarbeit and according to the location of a point on the screen.Once the device is tampered with, altered its position of the cursor on the screen

1.1.2.2.1. Mouse

A mouse is an input device, the two-dimensional movement on a flat surface of a Positioierungsmarke is tracked on the screen.It has triggering selektierne with which the objects can be activated.With the use of graphical user interfaces, the mouse as an input tool widely distributed.

Advantages: Advantages of the mouse you are fast and simplified command input to the keyboard.The precise positioning can be the smallest bodies characters on the screen respond, which is also the suitability for graphical applications.From the manufacturer is preisgüngstige and offers an extensive "mouse-compatible" software offering.

Disadvantages:The disadvantages of the mouse are initial coordination problems of the eye and hand, which is not always want to Vërfügung standing flat surface, and pollution and wear and tear (especially for mechanical mice).







1.1.2.2.2. Trackball

The roller ball is an input device like a mouse, the ball rolling on the surface and is located about one-third is visible.To control the Coursors is just the ball with the fingers moving without the ball rolling housing moves.With the rolling ball is a simple, lightning and exact positioning possible, but it is getting used.Use of the trackball finds especially notebooks.

1.1.2.2.3. Accessibility for notebooks

Since laptops are often used mobil, we tried dei number of the devices for the operation to a minimum.Furthermore, it is not always just a space for the operation of the mouse is available.

1.1.2.2.4. Joystick and Gamepad

The joystick is a joystick, with a large number of input keys, whose motion in two axes, and to a cursor controls.It is frequently used in computer games.Depending on the position change is another resistance value produced, the size of the computer, as he controlled the figure to steer.The force-feedback technology, the joystick reacts mechanically via a back-channel signals generated by the computer.With this joystick, for example, users of racing simulations, the forces of a car as a real benefit.

A gamepad is an input device, which looks like the joystick funktionsähnliche especially for the control of computer games thought.A gamepad is in its simple form a handy device that is usually on the left side of a tax Cross and on the right side of a series of buttons, which vary depending on the game shows.The domain of the Game Pads is therefore especially actionlastige games, a precise, catchy require control.For game consoles, the game pad is the most important and often the only input device.




1.1.2.2.5. Data Glove

With the Data glove covered with appropriate sensors, the movements of the fingers and hands and reconstructed so that the movements of the hand.He is displaying an input device, with the man three-dimensional objects in virtual spaces can manipulate.You can be a virtual hand grip, rotate, move; You can even take a pen and write with him.Unlike the mouse and other input devices, the data glove, is a much dimensionally input device.

During the lesson we spoke also about the Sensorbildschirm and the lightpen, but they are not the main elements.

1.1.2.3.Input image information

With the input of image data can be made between the collection of standing and moving images.When entering a standing image, the image point by point and scanned into a computer graphic format of the converted.The resulting image can be processed, embedded in the text and sent electronically.

1.1.2.3.1.Scanner.

Bildein scanner are times in which an image or a text lines - and pointwise scanned wird.ein lichtstrahl (laser) scans the various points of the presentation to register and you lim lihood speed differences, which in digital form as a raster image can be stored.
The gas can be scanned image point would bear more involved, regardless of whether it is text or a picture. Text, with a scanner were scanned, with texter detection programs to be processed.
Because of the design contrast, the sign with a stored template and compared to the corresponding characters transformed.

Following devices ty groups can be distinguished:

-Flat bed scanner.
-Handscanner.
-Stab- details or scanner.

Important criteria for selection of scanners:
-Gray depth.
-Maximum resolution.
-Schitts tellen.
-Auxiliary software included.
-The maximum available large.


1.1.2.3.2. Readers

Schriftenleser optical or magnetic recognize the importance of individual, the number of stored data sources and then automatically processed in encoding. These are pre-defined areas of the disk evaluated, in which the characters in machine-readable form. The layout of the data carrier is not covered.
Klarchriftbelege are both mechanically than with the eye-readable paper documents. The writings are normalized, in Scanners characters are optically read. The signals are received by a target set of patterns and each character is assigned to the appropriate importance.
Manuscript readers: manuscripts are sometimes difficult for people to see for machines is the identification process even more difficult. Handwriting readers evaluate only Blockbuchstabenaus.
Bar code readers: characters, primarily digits, in the form of strong among different bars. As an information carrier serves to paper in the form of labels or the packaging. With the help of a scanner will read the bar code and CNC processed. For humans is the bar code unreadable.

Hi!!!My name is Blanca Del Castillo,i am an exange estudents from Seville.Ihave a lot of problem to star whit my Bloc but now Ican tell to everybody why i stat hire.

Fist of all I must apologise because my english it´s so bad i can do lots of mistakes I will try to write well


Ok,I am doing these Bloc because i have informationverarbeitug one of the subject of my universities studies and i must to do it for pass these subject.

First of all,I from Seville which is a city from the South of Spain ,I like very much my city because it is very beautiful and the wheater is very good(perhaps so hot in the summer buy we have lots of beachs near)but the best from Seville in my opinions is the tipical party from here.
My favourite party from seville is the April feria is an increible week,i am going to explain it but the best is knowing it personally.The party is in a place which is called "recinto ferial" and there are a little house called "casetas" where the people is eating,drinking and of course dancing Flamenco since two of the eveningm8ore or less)untill..i don´t know it is up to you buy very very late.In the Feria there are a tipicall driks which is call "Rebujito" and it is a mix between white wine and Sprite and all the people drinks a lot of that(is like the bear in the October fest).


Another tipical party from Seville is the "Semana Santa" it is always before to the feria and it is for a week yet.In the Semana Santa we celebrate the death and resurrection of Christ through images and it is very nice,all the people is in the street watchig the images and after that eat the tipical "tapitas".



Another important thing from Seville are their momumets,the most famous momumet is the Seville cathedral which was building between the Muslim and the Christian and it is for that the Cathedral is so special because have a radical change in her structure.



Other monument is "la Torre del oro"the of that is the gold tower and It is called so because it is the place where the gold was kept coming to america in times of the kings Catholics.



But in my opinion the best place from Seville is the center of the town in general where trere are lot´s of nice place as the Santa Cruz Neighborhood which have lots of small street amd lot´s of pub very nice.

Having already enjoyed something of my city turn to have something of my family.I am the third daughter of a family of four siblings, the first is my brother Luis.el is the only child and no longer live at home, is 26 years and works at the chamber of commerce in Andalusia.Luis After my sister Marta comes with 25 years (only takes 11 months with my sister Luis) she works in a law firm in Seville is called Garrigues, and finally my sister who is the girl maria and is very funny, is still at school to the poor is not very good student but good! ! ! .And of course my parents,my father is called Luis and he works in Real estate business and my mother olga ,that works at home.
Well, speaking of me, I am 22 years old and studying at the University Pablo de Olavide direction and business administration.It is my last course because my university students is for five year and I have already made four or it is decided that ending my career abroad in order to exploit and try to learn languages.
I Linz reached a month ago! ! ! The truth is that I have moved up very fast this month, the city I like so much and I am going very well, I live in the julius raab with my friend Blanca in the same room.She also is Seville.
Since we arrived we have made some trips, the first was Salzburg I liked a lot, then went to Munich to the October fest, and this weekend we have been in halstadt where he was snowing all day! ! ! It was incredible.

Hi!!!My name is Blanca Del Castillo,i am an exange estudents from Seville.Ihave a lot of problem to star whit my Bloc but now Ican tell to everybody why i stat hire.

Fist of all I must apologise because my english it´s so bad i can do lots of mistakes I will try to write well


Ok,I am doing these Bloc because i have informationverarbeitug one of the subject of my universities studies and i must to do it for pass these subject.

First of all,I from Seville which is a city from the South of Spain ,I like very much my city because it is very beautiful and the wheater is very good(perhaps so hot in the summer buy we have lots of beachs near)but the best from Seville in my opinions is the tipical party from here.
My favourite party from seville is the April feria is an increible week,i am going to explain it but the best is knowing it personally.The party is in a place which is called "recinto ferial" and there are a little house called "casetas" where the people is eating,drinking and of course dancing Flamenco since two of the eveningm8ore or less)untill..i don´t know it is up to you buy very very late.In the Feria there are a tipicall driks which is call "Rebujito" and it is a mix between white wine and Sprite and all the people drinks a lot of that(is like the bear in the October fest).
Another important thing from Seville are their momumets,the most famous momumet is the Seville cathedral which was building between the Muslim and the Christian and it is for that the Cathedral is so special because have a radical change in her structure. Other monument is "la Torre del oro"the of that is the gold tower and It is called so because it is the place where the gold was kept coming to america in times of the kings Catholics. tn_se-cas-017-1064011 But in my opinion the best place from Seville is the center of the town in general where trere are lot´s of nice place as the Santa Cruz Neighborhood which have lots of small street amd lot´s of pub very nice. Having already enjoyed something of my city turn to have something of my family.I am the third daughter of a family of four siblings, the first is my brother Luis.el is the only child and no longer live at home, is 26 years and works at the chamber of commerce in Andalusia.Luis After my sister Marta comes with 25 years (only takes 11 months with my sister Luis) she works in a law firm in Seville is called Garrigues, and finally my sister who is the girl maria and is very funny, is still at school to the poor is not very good student but good! ! ! .And of course my parents,my father is called Luis and he works in Real estate business and my mother olga ,that works at home. Well, speaking of me, I am 22 years old and studying at the University Pablo de Olavide direction and business administration.It is my last course because my university students is for five year and I have already made four or it is decided that ending my career abroad in order to exploit and try to learn languages. I Linz reached a month ago! ! ! The truth is that I have moved up very fast this month, the city I like so much and I am going very well, I live in the julius raab with my friend Blanca in the same room.She also is Seville. Since we arrived we have made some trips, the first was Salzburg I liked a lot, then went to Munich to the October fest, and this weekend we have been in halstadt where he was snowing all day! ! ! It was incredible.